Auto Gas Generator Oxygen (PO) (Atmosphere desorption)
PSA Oxygen generator.
Atmosphere desorption PSA Oxygen generator based on the clean compressed air, zeolite molecular sieves as absorbent, tanking Taking PSA to get Oxygen equipment under the normal temperature.
According to Oxygen, Nitrogen is different in zeolite molecular sieves' absorbent face and diffusivity through PLC control of the valve, realizing compression absorbing, reducing pressure desorption this course, reach Oxygen, Nitrogen separation, get the standard Oxygen.
Working principle:
The oxygen generation system is meticulously developed using the PSA (pressure swing adsorption) principle. It uses high-quality oxygen molecular sieves as adsorbents to directly separate and extract oxygen from the air at room temperature. The compressed air, which has undergone drying and purification treatment, enters the adsorption tower containing the molecular sieve. Nitrogen, carbon dioxide, water, and other impurities in the air are heavily adsorbed into the solid phase of the molecular sieve, while oxygen is enriched and output in the gas phase due to its low adsorption amount.
When the adsorbent reaches saturation, the pressure is reduced to allow the zeolite molecular sieve to desorb and regenerate, enabling it to be reused repeatedly. The system is equipped with two adsorption towers: one tower for oxygen production and the other for desorption and regeneration. The two towers alternate in a loop controlled by an imported PLC to achieve continuous production of high-quality oxygen.
Technical Parameter
Resource: Air
Pressure: 4-7 bar
Pressure dew point ≤ 10 degree
Atmosphere dew point ≤ -65 degree
Air - Change with the Oxygen content
Product Oxygen Gas
Pressure ≤ 6 bar
Atmosphere dew point ≤ -65degree
Purity: 93%± 3
Oxygen: 5-5000 NM3/H
PSA Oxygen Generator sample models
| JO type PSA Oxygen Production Genrator. |
| Model & Specifications |
N2 Output
(Nm³/H) |
Effective air volume
(Nm³/H) |
N2purity |
N2 Pressure
Mpa |
| JO-3 |
3 |
0.8 |
93±2% |
0.1~0.4(Adjustable) |
| JO-5 |
5 |
1.25 |
| JO-10 |
10 |
2.5 |
| JO-20 |
20 |
5 |
| JO-30 |
30 |
7.5 |
| JO-50 |
50 |
12 |
| JO-60 |
60 |
15 |
| JO-80 |
80 |
19.5 |
| JO-100 |
100 |
23.5 |
| JO-150 |
150 |
35 |
| JO-200 |
200 |
48 |
Product Features
* Most reliable technology
* More advanced and more economical air separation modules. extremely low power consumption
* Simple engineering design, Less components = lower maintenance cost
* Automated Operation.
* Turn-key solution and pre-commissioned.
* Skid-mounted design, easy installation.
* Durable Molecular Sieve and Steel Structures ensure longer life.
* Low operating cost.
Production advantage.
1. Easier to operate. Automatic recording of gas flow operation, easy to monitor and track the working state at any time. - Automatic operating system, the whole process does not need duty personnel.
2. Higher reliability - with special valves, the service life can reach millions of times, and the system works stably and reliably. A reasonable design concept makes the equipment safer and more reliable for operation.
3. Flexible solutions: - Manual ball valves are installed in each membrane for easy maintenance and flexible capacity adjustment.
4. Cleaner Air Source - Four stage air filter ensures a cleaner air source. - Differential pressure meter reminder maintenance - manual and automatic drainage devices for draining condensed water
Package transportation & some end users
Audited Supplier 
){kind=link}
){kind=link}